How to Boot into Fastboot Mode on any Xiaomi Phone

Enter into Fastboot Mode on Xiaomi: Don’t know how to boot into Fastboot Mode in Xiaomi Devices? Here is the simple guide to boot into Fastboot Mode on any Xiaomi Phone using 2 Different ways.

Fastboot mode is also known by Download Mode or Bootlaoder Mode. This is very useful for many uses. The most common uses of the Fastboot mode is Flashing Stock Firmware(Stock ROMs), Flashing Custom Recoveries like TWRP & CWM, Restoring Backups Unlocking Bootloader, Installing OTA Updates, Removing Bloatware, Tweaking System, Overclocking Android Phones & many other uses are available there.

Like in Google Pixel & Android One devices there are used to Unlock bootloader & Flash images. However, Flashing Stock Firmware on Xiaomi Phones Is simple using Mi Flash Tool.

Steps to Boot into Fastboot Mode on Any Xiaomi Phones

Let’s find out how to Enter in fastboot mode? This method is working with all Xiaomi devices including Redmi Note 4, Redmi Note 3, Mi 6, Mi 5, Mi 4, Redmi 4/4A/4X, Mi Max/2, Mi Mix/2 & so on.

There are two possible ways to boot into Fastboot mode which is using Hardware keys, ADB Command & Using application.

Enter into Fastboot Mode using Hardware Keys

This is the easiest & commonly used method to enter into Fastboot mode of your Xiaomi device.

Step 1: Switch off your Xiaomi Phone.

Step 2: Now, Press Power button + Volume Down button simultaneously & hold it for few seconds until the Fastboot Logo appears.

Step 3: You will see Fastboot Mode Logo with Mi Bunny & That’s it! You are in the fastboot mode now.

Now, Connect your Android device using USB Cable to the computer for further use of this.

Boot into Fastboot Mode using ADB Command

This is the alternative method to enter into fastboot mode using ADB Command. You need to give a simple command.

1. Install ADB & Fastboot Driver on your computer.

2. Enable USB Debugging on your Xiaomi Smartphone.

How to Enable USB Debugging on Xiaomi Phones?

Here are the simple steps to enable USB Debugging on your device.

1. Go to Settings > About Phone > Tap on MIUI Version for 7-8 times. This will allow developers option on your phone.

2. Now, Go to Settings > Additional Settings > Developers Options.

3. You will see box for “Enable USB Debugging” enable it.

That’s it! You have enabled USB Debugging on your phone.

4. Connect your android device to the computer.

5. Open Command window from Start menu or Press right click while pressing Shift button & from options choose Open Command Window here.

6. In the Command Prompt, Enter the following command to check your device is connected or not.

adb devices

7. Now, Type the command given below to boot into fastboot mode.

adb reboot bootloader

Your phone will automatically reboot to bootloader. Now, you are ready to use for the further development.

So, This was the method to boot into Fastboot mode on any Xiaomi device it works with every Xiaomi device.

If you have any question related this, then Please do comment below & Please share this article with your friends!